This SAE-30P4FE4E1-SHTRX is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade , which supplies, 4 ethernet port and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422,dry contact closure, two optical interface for optional 1+1 auto protection switch (APS). 4 slots plug-in modules which included 4xE1 channels module, FXO/FXS module and 2x Nx64K V.35 module. The maximum capacity will be up 4 multi function plug-in modules which could be combinations with above modules. The high flexibility, performance, is the best solution for voice/data/video services in existed market. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, phone signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M).
SAE-30P4FE4E1-SHTRX is made with high quality of rigorous screened components, which have superior performance in stability, environmental adaptability. It can work normally in very cold environment to very hot from -35℃to +75℃. The product is planned in a way to have better resistance against corrosion and electromagnetic interference. Power input also made a suitable and reliable types of power, to get more powerful suitability to environment.
| Ports: 4 E1 ports transmission | |
|---|---|
| 2 SFP fiber interfaces | |
| 4×FXO/FXS/EM2-4/Magnet telephone module | 4×Framed E1 module(75Ω)/(120Ω) |
| 8×FXO/FXS/2 line audio/Magnet telephone module | 16×FXO/FXS/2 line audio/Magnet telephone module |
| 2×V.35 (2.048M Fixed speed) module | 4×RS232/422/485 or 8x dry contact closure module |
| 4*FE to E1 bridge(wire speed 2.048M) module | 2×V.35 (N*64K N=1-32) module |
| 4 multi function slots plug-in modules | |
| Wave Length: 820nm | Transmitting power: -12dBm (Min) ~-9dBm (Max) |
| Receiver sensitivity: -28dBm (Min) | Link budget: 16dBm |
| 4FE(wire speed 100M)Ethernet ports | |
| Maximum transmission distance: 40Km | Transmission distance: 40Km @ 9 / 125um single mode fiber |
| Wave Length: 1310nm | Transmitting power: -9dBm (Min) ~-8dBm (Max) |
| Receiver sensitivity: -27dBm (Min) | Link budget: 18dBm |
| 4 slots plug-in modules | |
| Packet Forwarding Rate: n*64Kbps±50ppm; | E1 Impedance: 75Ω (unbalance) |
| Fiber/ Multi-mode Fiber | |
| Voltage of Ring: 75V/ Frequency of Ring: 25Hz | 120Ω (balance); |
| Fiber/ Single-mode Fiber | |
| Voltage of Ring: 35V /Frequency of Ring: 17Hz-60Hz | Total amount of resistance for 2 line: 600 Ohm (pick up) |
| E1 specification | |
| Interface rate:10/100 Mbps | Total amount of resistance for 2 line in FXO switch & EM 2/4 Line: 600 Ohm |
| half/full duplex auto-negotiation | Interface Standard: Compatible with IEEE 802.3 |
| FXS Phone specification | |
| MAC Address Capability: 4096 | IEEE 802.1Q (VLAN) |
| Multifold power mode options: AC220V | Connector: RJ45 |
All rights company Smart Architecture of Espadana Reserved.